The Method Of Inductive Pulse Interference In The Machine Tool Customer Service Network Of CNC Machine Tools


There are many ways to overcome grid pulse interference, the most fundamental way is to eliminate the source of interference. This requires the transformation of various electrical equipment. In the case of AC motors, freewheeling is difficult. In Siemens’ servo system, the alternating current is rectified into stagnant power and then inverted. In this way, the motor is isolated from the grid, and the freewheeling diode can also be connected to the DC current. All kinds of machinery and equipment produced in West Germany now use industrial drive control for electric motors. This not only improves the efficiency of the motor and enhances the protection of the motor, but also avoids it and avoids their interference with the grid.
 
In our country, in order to eliminate the interference in the power grid, it is still difficult to achieve in a short period of time. Usually, the transformer isolation method is used to reduce the influence of the interference pulse on the numerical control system. The principle of this method is to use the characteristics of the inductive reactance of the transformer and the frequency of the signal. Because the frequency of the interference pulse is much higher than 50hz AC. So the transformer transmits much less power to it.
 
Capacitors can also be used to filter interference pulses. Large-capacity filter capacitors are generally installed in DC circuits. These capacitors are usually electrolytic capacitors. Compensate with a non-inductive capacitor. For example, Tangshan Cement Machinery Factory adopts this measure.
 
In addition to grid and electromagnetic interference, there are other factors that can cause downtime failures. For example, the electrical three defenses mentioned in electrical engineering, that is, the influence of humidity, salt spray, and mold should not be ignored. This situation has been encountered in Zhenjiang Hydraulic Parts Factory. The factory is located in the south of the Yangtze River, and the climate is humid. Although a humidifier is used, the circuit board is still corroded, causing downtime.

 


At Be-cu.com,we use advanced equipment to offer you Unparalleled precision for producing metal and plastic machining parts

  • We combine the latest CNC milling and turning processes with proprietary technology to deliver high quality, on-demand parts.
  • Our team of engineers and machinists program the equipment to optimize cutting time, surface finish, and final tolerance to meet your design specifications
  • We specialize in cnc precision machining, single part prototyping, short to medium production runs, manufacture parts on time, every time, so you can stay ahead of schedule
  • CNC machining can create very similar parts to series parts. It is often more efficient and faster than other rapid prototyping technologies for the manufacture of a quantity of prototypes between 1 and 10 parts . We also recommend CNC machining for parts with large sizes (greater than 600 mm).