The CNC paid the program bill of the machine tool factory

The CNC paid the program bill of the machine tool factory

CNC paid the program list. The programmer has numerically calculated and installed the instructions of the basic characteristics according to the process analysis. The list of the only data of the process parameters of the Jilin CNC Jiaoniu high school and the manual data input realizes the main basis for CNC teaching you are different The different numerical control systems of the CNC machine tools are CNC handed to you. The format of the program list is also the same as that of the CNC.
CNC gives you a program list
Part number, plus ranking, compilation, review
In addition, in the CNC for more complex CNC cutting, the tool axis diagram should be returned.
The analysis and processing steps of the part drawing are as follows
1 Structural features and functions of parts
This part is a typical wrinkle. It is a short answer for its structural structure. It is used to fit the inner ring of the rolling bearing. The elementary surface is used to install the shaft and add your thread to its bones and bones.
2 Plus your main surface and technical requirements
The main surface of the part can be set as a cylindrical mask, round quasi-surface, and the thread of the juice according to the individual components and accuracy requirements. From the Kyoto requirements, the dimensional accuracy and the surface roughness requirements are the surface roughness values ​​installed by the user. It also requires that the position accuracy within the control range, such as verticality and uan movement, are required to be within the placement position. It can be seen that the additional processing accuracy requirements are very strict.
The additional material is required to be refined and refined or to obtain an immediate structure. The scalar requires a higher hardness and model, while the core requires good plasticity and humanity, plus the heat treatment you require. The thread and center hole are not hard.
3 Mao Bah’s only manufacturing form
The function of the spindle unit to transfer the button pitch. Considering that the production batch is produced, the structural characteristics of the integrated parts are used as the gross value of the thermal circle.
4 Process analysis
1 The main shaft is used to probe the Hubei Gaba with high and low. The reason for the thick removal of the layer on the workpiece that needs to be hard is
1 After the thread part is fired, it is paid in the morning on the lathe. If the number of the thread is removed, the thread will be deformed. Therefore, it is not impressed that the hard process method of the thread part is that the six-zone exploration layer is removed during the grouting period of the lathe. The probe is low but not hard